Quick Start Guide

From C-Labs Home

Revision as of 21:54, 23 September 2014; pzebelloni (Talk | contribs)
(diff) ←Older revision | Current revision | Newer revision→ (diff)
Jump to: navigation, search

Contents

What you will need

To operate a HardWaves system, some items are required, other are helpful.

Required

  • One HardWaves Surfer
  • One or more HardWaves One board(s)
  • A Small magnet
  • A host system (Raspberry-PI or any other supported host)
  • A computer with a WEB browser installed (we suggest Firefox or Chrome)

Not essential but helpful to have

  • Internet connection 
 To update or download software, we recommend that you connect your host system to the internet either via and ethernet cable or a wifi adapter.

Step 1 - Host Setup

A ready to use host system and a working Surfer can be setup following the following instructions.

How to build a HardWaves system

Step 3 - Surfer setup

Assuming that previous step is OK, Surfer setup is quite simple:

  1. click (or tap) on "Enroll Nodes" tab
  2. enter 16 hex digits (0..9, a..f, case insensitive) to change the "Network Key" and confirm

That's all.

Step 3 - Enroll HardWaves One node(s)

Bla bla

Retrieved from "https://www.c-labs-wt.com/modules/mediawiki/index.php?title=Quick_Start_Guide"
Personal tools